DG2041A Function Waveform Generators
Application
1. Simulation of sensors and Real Word Signals
2. In Circuit Function Test
3. Serial Bus Test
4. IC test
Advanced Features
1. Direct Digital Synthesizer(DDS) Technology
2. 100 MSa/s of sample rate, 14 bits of vertical resolution,512pts of Waveform Length
3. 10 standard waveforms: Sine, Square, Ramp, Pulse, Noise, Exponential Rise, Exponential Fall, Sin(x)/x, Cardiac, DC
4. User defined Arbitrary Waveform
5. Versatile modulation: AM,FM,PM,FSK,PWM,Sweep,Burst
6. Versatile input and output signals: Waveforms output, Synchronous Signals output,External Modulation Source, Clock Reference (10 MHz),External Trigger and Internal Clock Output (10 MHz)
7. Interface: USB Host & Device, RS-232, GPIB, LAN
8. Built-in LAN interface, supports WEB remote control
9. USB Host interface support USB flash drive
Typical Output
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
| AM | FSK | Sweep |
Easy to use Features
![]() |
![]() |
| Press key to enter help system | File system (USB flash drive) |
Performance Characteristics
| Model | DG2041A |
| Standard Waveforms | Sine-Square-Ramp-Pluse-Noise-Exponential Rise-Exponential Fall-Sinc-Cardiac��DC |
| Sine | 1 µHz to 40 MHz |
| Square | 1 µHz to 40 MHz |
| Pluse | 500 µHz to 16 MHz |
| Ramp | 1 µHz to 500 kHz |
| Arb | 1 µHz to 12 MHz |
| White Noise | 20 MHz bandwidth (-3 dB) |
| Resolution | 1 µHz |
| Accuracy | Within 90 days: 10 ppm |
| Within 1 year: 20 ppm,18C - 28C | |
| Temperature index | < 2 ppm/C |
Sine Wave Spectral Purity
| Model | DC to 20 kHz |
| 20 kHz to 100 kHz | |
| 100 kHz to 1 MHz | |
| 1 MHz to 10 MHz | |
| Total Harmonic Distorion | DC to 20 kHz 0.04% |
| Spurious (non-harmonic) | DC to 1 MHz < -70 dBc |
| 1 MHz to 10 MHz < -70 dBc + 6 dB/octave | |
| Phase Noise | 10kHz Offset �C115 dBc / Hz, typical |
| Square Wave Characteristic | |
| Rise/Fall Time | < 8 ns (10% to 90%) |
| Overshoot | < 2% |
| Duty Cycle | 20% to 80% (to 10 MHz) |
| Asymmetry | 1% of period+ 5 ns |
| (below 50% Duty Cycle) | |
| Ramp | 1 µHz to 1 MHz |
| Jitter | 300 ps + 0.1% of period |
| Pulse Wave Characteristics | |
| Pulse Width | 2000 s max period; 12ns min period; 1ns resolution |
| Variable Edge Time | 5 ns to 1 ms |
| Overshoot | < 2% |
| Jitter | 300 ps + 0.1% of the period |
| Arb Wave Characteristics | |
| Frequency Range | 1 µHz to 12 MHz |
| Waveform Length | 2 pts to 512 kpts |
| Amplitude Accuracy | 14 bits (including sign) |
| Sample Rate | 100 MSa/s |
| Minimum Edge Time | 10 ns |
| Jitter (RMS) | 2.5 ns + 30 ppm |
| Non-Volatile Storage | 4 waveforms |
| Output Characteristics | |
| Amplitude | 20 mVpp - 10 Vpp (50 Ω) |
| 40 mVpp - 20 Vpp (High Z) [Note1] | |
| Amplitude Accuracy (100 kHz) | ± 1% of setting ± 1 mVpp |
| Amplitude Flatness (sinewave relative to 100 kHz) | <10 MHz 0.1 dB (± 1%) |
| 10 MHz to 25 MHz 0.15 dB (± 1.5%) | |
| 25 MHz to 40 MHz 0.18 dB (± 4.0%) | |
| Other Parameters | |
| Clock Reference | 10 MHz |
| I/O | USB Host, USB Device, RS-232, LAN/GPIB |
| Optional Configuration | Digital Logic Output Module |
| AM Modulation | |
| Carrier Waveforms | Sine, Square, Ramp, Arb |
| Source | Internal/ External |
| Modulating Waveforms | Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) |
| Depth | 0% - 120% |
| FM Modulation | |
| Carrier Waveforms | Sine, Square, Ramp, Arb |
| Source | Internal/ External |
| Modulating Waveforms | Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) |
| Frequency Deviation | DC to 20 MHz [Note2] |
| PM Modulation | |
| Carrier Waveforms | Sine, Square, Ramp, Arb |
| Source | Internal/ External |
| Modulating Waveforms | Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) |
| Phase Deviation | 0 to 360 |
| FSK Modulation | |