OWON HDS 1022M-N HAND HELD DIGITAL STORAGE OSCILLOSCOPE

Application:

1. Design and Debug

2. Circuit function test

3. Education and technical training

Main Features:

20MHz~60MHz Bandwidth

up to 250MS/s real time sample rate

2 in 1 (Multimeter function support)

Dual Input Channels

Advanced Trigger Functions

Adjustable Trigger sensitivity

USB Storage /Auto measurement

Replaceable Li-ion Battery Back-up

3.8'' TFT panel guarantee to read clearly even under hard light

Oscilloscope Specification

Multimeter specifications

General specifications

2 in 1 T&M instrument

OWON HDS-N series instrument combine digital oscilloscope and multi-meter.

High precision Multimeter function (3 3/4 digits)
The HDS-N series handheld digital oscilloscope is equipped with Multimeter functions. It includes voltage, current, resistance, capacitance, diode test, continuity test.High resolution and precision design guaranty the accurate testing result. The user can choose the automatic or manual meas- urement according to different testing conditions

Average Acquisition Mode
This function reduce random noisy in the signal effectively and quite convenient for the engineer to analyze the waveform by. Below figure is the waveform which achieved after averaging which to show how this function reduces the influence from noisy directly.

USB Storage
This function could save on-site abnormal waveforms and data which can��t be analyzed in time, back them to the laboratory for later analysis. It also can save the data into other formats for further development.  

Adjustable trigger sensitivity
OWON HDS-N series oscilloscope added Adj-ustable function on the trigger sensitivity, there-fore to distinguish the superimposed signal on
the trigger signal and prevent from error trigger.

Alternate trigger function
OWON HDS-N series added the alternate trigg-er function. You can test two different groups of signal in the same time and help to enhance
work efficiency greatly.

Observation for instantaneous signal
Digital trace mode is a function of analog oscill-oscope recurs to the digital one. The function can show the waveform value which base on the time
It will help the user to find the irregular waveform and analyze the complicated dynamic signal. All of our products have the function to refresh the sig-
nal and therefore, can observe the instantaneous signal. The function is very useful to make adjust-ment for the tested system

Video Trigger
The HDS-N series handheld digital oscilloscope includes NTSC, PAL or SECAM standard video triggers which help to improve the efficiency
obviously.

Click the picture to view large picture

Click here to download the English Manual:

http://WWW.aidetek.com/New_products_info/Datasheet/owon/HDS1022 USER MANUAL.pdf

Customer Support Phone Number: (408) 329-7985
Customer Support Skype: Aidetech